QUESTION What is the correct way to handle loose Large AG Tires, what equipment is required, what are the most vulnerable portions of tire prone to damage, and which specific handling techniques should be avoided? AG TIRE TALK KEY...
480/80R50 – Tire Size 🔴 480 = Section Width (width of tire). In example 480 = 480 millimeters, or ~19 inches wide. 🔴 80 = Aspect Ratio (series). Specifies sidewall height, expressed in a percentage. In example, the sidewall...
While rolling resistance cannot be avoided in its entirety, farmers can achieve the best tire performance by implementing the proper tire air pressures. By doing so, your farms can achieve the following benefits: ⚫ Minimal ground compaction ⚫ Increased tire...
Welcome to our Spring 2025 Driving Yield thru Tire Technology Podcast, showcasing all the latest new tire products that not only Increase Yield, but also Improve Productivity, and Reduce Fuel - all straight from the manufacturer’s...
Regardless of tire chosen, if an operator wants to maximize both fuel economy AND machine efficiency, they should target a slip rate of approximately 12%. At this slip rate, the operator is not using excess fuel to get the job done, while at the same time...
The design rim, also known as the measuring rim width, is derived from the theoretical rim width according to design standards. If a rim is produced in this specific size, it is considered the recommended rim. If not, the closest available size becomes the recommended...